this is information on a product in full production. march 2012 doc id 022760 rev 1 1/9 9 STTH5R06DJF ultrafast recovery diode high efficiency datasheet ? production data features suited for dc/dc converts low losses high t j high surge current capability high energy aval anche capability 1 mm package thickness ecopack ? 2 compliant component description high performance diode suited for high frequency dc to dc converters. packaged in powerflat? 5x6, this device is intended for use in low voltage high frequency inverters. tm: powerflat is a trademark of stmicroelectronics table 1. device summary symbol value i f(av) 5 a v rrm 600 v t j 175 c v f (typ) 0.95 v t rr (typ) 30 ns k k k a(1) a(2) a(1) a(2) a(2) a(1) powerflat 5x6 STTH5R06DJF www.st.com
characteristics STTH5R06DJF 2/9 doc id 022760 rev 1 1 characteristics to evaluate the maximum conduction losses use the following equation: p = 0.9 x i f(av) + 0.06 i f 2 (rms) table 2. absolute ratings (limiting values with anode terminals short-circuited) symbol parameter value unit v rrm repetitive peak reverse voltage 600 v i f(rms) forward rms current 45 a i f(av) average forward current t c = 160 c = 0.5 5a i fsm surge non repetitive forward current t p = 10 ms sinusoidal 190 a t stg storage temperature range -65 to + 175 c t j maximum operating junction temperature 175 c table 3. thermal parameter symbol parameter maximum unit r th(j-c) junction to case 2.0 c/w table 4. static electrical characteristics (anode terminals short-circuited) symbol parameter test conditions min. typ max. unit i r (1) 1. pulse test: t p = 5 ms, < 2% reverse leakage current t j = 25 c v r = 600v 60 a t j = 125 c 60 600 v f (2) 2. pulse test: t p = 380 s, < 2% forward voltage drop t j = 25 c i f = 5 a 1.55 2.00 v t j = 125 c 0.95 1.20
STTH5R06DJF characteristics doc id 022760 rev 1 3/9 table 5. recovery characteristics symbol parameter test conditions min. typ max. unit t rr reverse recovery time t j = 25 c i f = 1 a v r = 30 v di f /dt = - 100 a/s 30 40 ns i f = 1 a v r = 30 v di f /dt = - 50 a/s 40 55 i rm reverse recovery current t j = 125 c i f = 5 a, di f /dt = - 200 a/s, v r = 400 v 6.0 8.0 a s factor reverse recovery softness factor 0.5 - q rr reverse recovery charges 180 nc table 6. turn-on switching characteristics symbol parameter test conditions min. typ max. unit t fr forward recovery time t j = 25 c i f = 5 a di f /dt = - 100 a/s v fr = 1.6 v 150 ns v fp forward recovery voltage 2.3 3.5 v figure 1. average forward power dissipation versus average forward current figure 2. forward voltage drop versus forward current 0 1 2 3 4 5 6 7 8 9 01234567 = 0.05 t =tp/t tp p f(av) (w) i f(av) (a) = 0.5 = 0.2 = 0.1 = 1 0.1 1.0 10.0 100.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5. 0 t j =125 c (maximum values) t j =125 c (typical values) t j =25 c (maximum values) v fm (v) i fm (a)
characteristics STTH5R06DJF 4/9 doc id 022760 rev 1 figure 3. relative variation of thermal impedance junction to case versus pulse duration figure 4. peak reverse recovery current versus di f /dt (typical values) figure 5. reverse recovery time versus di f /dt (typical values) figure 6. reverse recovery charges versus di f /dt (typical values) figure 7. softness factor versus di f /dt (typical values) figure 8. relative variations of dynamic parameters versus junction temperature 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 single pulse z th(j-c)/ r th(j-c) t p (s) 0 2 4 6 8 10 12 0 50 100 150 200 250 300 350 400 450 500 i f =i f(av) v r =400 v t j =125 c i rm (a) di f /dt(a/s) 0 20 40 60 80 100 120 140 050 1 00 1 50 2 00 2 50 300 350 4 00 4 50 500 i f =i f(av) v r =400 v t j =125 c di f /dt(a/s) t rr (ns) 0 40 80 120 160 200 240 280 0 50 100 150 200 250 300 350 400 450 500 i f =i f(av) v r =400 v t j =125 c di f /dt(a/s) q rr (nc) 0.0 0.2 0.4 0.6 0.8 1.0 0 50 100 150 200 250 300 350 400 450 500 i f =i f(av) v r =400 v t j =125 c di f /dt(a/s) s factor 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 25 50 75 100 125 i f =i f(av) v r =400 v reference: t j =125 c i rm s factor q rr t j (c)
STTH5R06DJF characteristics doc id 022760 rev 1 5/9 figure 9. transient peak forward voltage versus di f /dt (typical values) figure 10. forward recovery time versus di f /dt (typical values) figure 11. junction capacitance versus reverse voltage applied (typical values) figure 12. thermal resistance junction to ambient versus copper surface under tab 0 1 2 3 4 5 6 0 50 100 150 200 250 300 350 400 450 500 v fp (v) i f =i f(av) t j =125 c di f /dt(a/s) 0 10 20 30 40 50 60 70 80 90 100 110 50 100 150 200 250 300 350 400 450 500 t fr (ns) i f =i f(av) v fr =1.6v t j =125 c di f /dt(a/s) 10 100 1000 1 10 100 1000 c(pf) f=1 mhz v osc =30 mv rms t j =25 c v r (v) 0 50 100 150 200 250 012345678910 powerflat 5x6 r th(j-a) (c/w) scu(cm 2 ) epoxy printed circuit board fr4 copper thickness = 35 m
package information STTH5R06DJF 6/9 doc id 022760 rev 1 2 package information epoxy meets ul94, v0 cooling method: by conduction (c) in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 13. footprint (dimensions in mm) table 7. powerflat 5x6 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 0.80 1.00 0.031 0.039 a1 0.02 0.05 0.001 0.002 a2 0.25 0.010 b 0.30 0.50 0.012 0.020 d 5.20 0.205 d2 4.11 4.31 0.162 0.170 e 1.27 0.050 e 6.15 0.242 e2 3.50 3.70 0.138 0.146 l 0.50 0.80 0.020 0.031 k 1.275 1.575 0.050 0.062 d2 e2 k l b e d e a a1 a2 1.27 0.62 0.95 0.98 6.29 4.33 3.86 5.35 4.41
STTH5R06DJF package information doc id 022760 rev 1 7/9 figure 14. tape and reel specifications dot identifying pin a1 location user direction of unreeling all dimensions are typical values in mm 4.0 8.0 6.30 2.0 12.0 5.30 1.75 5.5 ? 1.55 ? 1.5 0.20 1.20 0.30 r 0.50
ordering information STTH5R06DJF 8/9 doc id 022760 rev 1 3 ordering information 4 revision history table 8. other information order code marking package weight base qty delivery mode STTH5R06DJF-tr th5r 06 powerflat 5x6 0.095 g 3000 tape and reel table 9. document revision history date revision changes 16-mar-2012 1 first issue.
STTH5R06DJF doc id 022760 rev 1 9/9 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
